These are 52 mm Stepper Motor Driven
gauges with a 270°LED
ALL Prosport PEAK/HOLD Gauges are ELECTRIC!!!
No analog here!
they allow you to set the warning feature to either
beep or change color (or both) once the gauge reaches
your pre-set limit. These are very easy to use, all
programming is done from the front push button! You
may also use an external warning light (like a shift
light) as well.
Peak, hold, warn...what is it?
The peak/warn fuction lets you set a point on the
gauge that will alert you. Lets say you run 10
pounds of boost on your boost controller, and you
set the gauge warning feature to 12 pounds. You
do a run, and your boost spikes past 12, the gauge
will warn you by chnaging color and making a noise.
Youd like to see just how far it spiked, so you
hit the "hold" feature, which will make the needle
go to the highest it has been since you last reset
it... which in this example lets you know you spiked
to 14 pounds. You can now andjust your boost gain
270° dial sweep provides quick one glance accuracy.
Track tested and race proven these gauges use precision
electric senders to keep hazardous fluids out of
the passenger compartment.
All of our Premium Series gauges perform a dramatic
opening ceremony with a full pointer sweep each time
the vehicle is turned on AND Off.
Wire up the first gauge for power and daisy chain
the power to each gauge as needed! As only Prosport
would do, the Daisy chain power leads come with them!